keine Partitionen angelegt, und die zuerweiternde Devices sind mit LVM konfiguriert. \\
Device /dev/sdX ohne mpio muss online erweitert werden : \\
\\
Device /dev/mapper/vol1 mit mpio (/dev/sdc+/dev/sdd)
ine Partitionen__ angelegt, und die zuerweiternde Devices sind mit LVM konfiguriert. \\
\\
Device **/dev/sdX** __ohne mpio__ muss online erweitert werden:
<code>
1. Storage LUN resizen
2. echo 1 > /sys/block/sdX/device/generic/device/rescan oder rescan tool von Lin
Ns, using the ID is a good way to narrow down the devices you care about.
<code>
[root@scaley ~|RootSca... e a look at how the SCSI layer views the multiple devices that make up the separate paths to the LUN. \\
Note that you’ll use the devices found in the previous output, in this case “b... ike.
<code>
[root@scaley ~|RootScaley]# fdisk -l /dev/sd[bcde] 3>&1 2>&3 | grep GB
Disk /dev/sdb: 107.3
sein darf.
Der Befehl dazu lautet:
dd if=/dev/cdrom of=cd-rom.iso
Vorher legen Sie eine Prüfs... m“ an.
Verwenden Sie dazu den Befehl:
md5sum /dev/cdrom -c cd-rom.md5
Haben Sie nun das Image ers
ting documentation of any kind. It is targeted at developer teams, workgroups and small companies. It h... * [[doku>plugins|Installing plugins]]
* [[doku>development|Development Resources]]
**DokuWiki Feedback and Community**
* [[doku>newsletter|Subscribe
drücken Sie die EINGABETASTE.
- Geben Sie **set devmgr_show_nonpresent_devices=1** ein, und drücken Sie die EINGABETASTE.
- Geben Sie Start **DEVMGMT.MSC** ein, und drücken Sie die EINGABETASTE.
ecunden gerade gelten:
for a in /sys/class/scsi_device/*/device/timeout; do echo -n "$a "; cat "$a" ; done;
Ändern mit:
echo 180 > /sys/class/scsi_device/0\:0\:0\:0/device/timeout
Dauerhaft ändern über /etc/udev/rules.d/99-vmware-scsi-udev.rules
# Re
dapter \\
1100 - 1299 Asynchronous Communication Device, Adapter, oder Port \\
1300 - 1399 Game Port ... Printer \\
1500 - 1599 Synchronous Communication Device, Adapter, oder Port \\
1700 - 1799 Festplatte... Konfiguration \\
2-1-3-2 Initialize PCI bus and devices. \\
2-1-3-3 initialisiere Grafikkarte. \\
2... 3-4-1 Enter SETUP. \\
4-3-4-2 Initialisiere boot device. \\
4-3-4-3 Boot code was read OK. \\
~~UP~~