keine Partitionen angelegt, und die zuerweiternde Devices sind mit LVM konfiguriert. \\
Device /dev/sdX ohne mpio muss online erweitert werden : \\
\\
Device /dev/mapper/vol1 mit mpio (/dev/sdc+/dev/sdd)
ecunden gerade gelten:
for a in /sys/class/scsi_device/*/device/timeout; do echo -n "$a "; cat "$a" ; done;
Ändern mit:
echo 180 > /sys/class/scsi_device/0\:0\:0\:0/device/timeout
Dauerhaft ändern über /etc/udev/rules.d/99-vmware-scsi-udev.rules
# Re
dapter \\
1100 - 1299 Asynchronous Communication Device, Adapter, oder Port \\
1300 - 1399 Game Port ... Printer \\
1500 - 1599 Synchronous Communication Device, Adapter, oder Port \\
1700 - 1799 Festplatte... Konfiguration \\
2-1-3-2 Initialize PCI bus and devices. \\
2-1-3-3 initialisiere Grafikkarte. \\
2... 3-4-1 Enter SETUP. \\
4-3-4-2 Initialisiere boot device. \\
4-3-4-3 Boot code was read OK. \\
~~UP~~
Ns, using the ID is a good way to narrow down the devices you care about.
<code>
[root@scaley ~|RootSca... e a look at how the SCSI layer views the multiple devices that make up the separate paths to the LUN. \\
Note that you’ll use the devices found in the previous output, in this case “b... ike.
<code>
[root@scaley ~|RootScaley]# fdisk -l /dev/sd[bcde] 3>&1 2>&3 | grep GB
Disk /dev/sdb: 107.3
====== /dev/null erstellen ======
Falls mal mit root gearbeitet worden und /dev/null aus Versehen gelöscht, überschrieben oder verschoben, dann hilft folgendes:
cd /dev
rm null
mknod null c 1 3
chmod 0666 null
Ohne **/dev/null** läuft Linux so gut wie nicht.
stem:/var/log/logfile.log /var/log/logfolder/ 1> /dev/null 2> /dev/null
</code>
* Mit ssh auf System A anmelden und ein key erstellen mit:
ssh-keygen -t r
linuxhost:/
</code>
oder
while true; do dd if=/dev/zero of=/mnt/Testfile count=500 bs=1048576; done
... hier wird ein File mit 500MB generiert:
dd if=/dev/zero of=/mnt/Testfile count=500 bs=1048576
~~U
e nützliche Option von mke2fs weiter:
mke2fs -n Device
tut lediglich so, als würde es das Dateisyste... superblock ===
Find out superblock location for /dev/sda2:
<code>
# dumpe2fs /dev/sda2 | grep superblock
Sample output:
Primary superblock at 0, Group desc... ernate superblock # **32768**:
# fsck -b 32768 /dev/sda2
<code>
Sample output:
fsck 1.40.2 (12-Jul-20